Forging Type Carbide Drilling Tools 2.5Mpa DTH Drill Bits External Turning Tool
Production Description
With professional manufacturing experience in DTH hammer production, our factory can supply you with high pressure and medium to low-pressure DTH hammers. It strictly matches with API standards and other Chinese industry standards.It is durable for being produced with advanced craftwork and good material.
Our hammer and bits are made of high-quality alloy steel with advanced heat treatment to assure good drilling performance and long service life. They are widely used by our customers all over the world.
Advantage:
1.Valveless air distribution, more reliable.
2.Piston with simple but compact design, long life.
3.More efficient energy transfer, faster drilling speed, lower air consumption, and lower oil consumption.
4.Fewer internal parts, simple structure, longer life, less failure, and easier to maintain, with all heat-treated parts;
5.Easy to disassemble, thanks to the top sub, drive chuck and external cylinder all are connected by a multi-step thread.
Application:
1. Suitable for high-pressure drilling rigs
2.Water well drilling
3.Record-breaking penetration
4.Exploring Civil Engineering Applications
5.Lowest cost per foot drilled
6.Simple & robust design
7.Exploring Civil Engineering Applications
8.Foot Valve not required in the bit
9.Longer parts of life
10.Maximizes efficiency
Specification:
| DTH hammer type | HD35 | HD45 | HSD4 | HQL4 |
| Length(less bit) mm | 930mm | 1030 | 1084 | 1097 |
| Weight(less bit) kg | 25kg | 39 | 40.5 | 41 |
| External diameter mm | Φ82mm | Φ99 | Φ99 | Φ99 |
| Bit shank | DHD3.5 | COP44 DHD340 | SD4 | QL40 |
| Hole range(mm) | Φ90-110 | Φ110-135 | Φ110-135 | Φ110-135 |
| Connection thread | API 2 3/8” Reg. | API 2 3/8" Reg | API 2 3/8" Reg | API 2 3/8" Reg |
| | | | |
| Working pressure | 1.0-1.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa |
| Impact rate at 1.5-1.7Mpa | 28Hz | 27Hz | 27Hz | 27Hz |
| Recommended Rotation speed | 25-40r/min | 25-40r/min | 25-40r/min | 25-40r/min |
| Air consumption | 1.0Mpa | 4.5m3/min | 6.0m3/min | 6.0m3/min | 6.0m3/min |
| 1.8Mpa | 9.0m3/min | 10.0m3/min | 10.0m3/min | 10.0m3/min |
| 2.4Mpa | / | 15.0m3/min | 15.0m3/min | 15.0m3/min |
How to Select Threaded Button Bits Face shape and Carbide Button Shape
Drop Center
For high penetration rates in soft to medium-hard and fissured rock formations.
Concave Face
The all-round application bit face specifically for a medium-hard and homogeneous rock formation. Good hole deviation control and good flushing capacity.
Convex Face
For high penetration rates in soft to medium-hard with low to medium air pressure. It is the most resistant to steel wash, and good resistance to steel wash step gauge bit.
Flat Face
This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates and resistance to steel wash.
B: Insert Carbide Button shape Selection
The different button is ideal for different ground conditions, abrasive levels, and penetration levels. In general, the more gauge buttons, the better over performance, especially in hard rock.
Spherical * Application Strength-multipurpose
* Best suited to soft abrasive
* 25,000 to 45,000 PSI (170 to 300 MPa)
* Abrasive to very abrasive
Ballistic Button
* Application Strength- fast penetration
* Best suited to soft ground
* 10,000to 20,000 PSI(70 to 140 MPa)
* Nonabrasive ground
Semi-ballistic
* Application Strength-fast penetration
* Best suited to medium ground
* 15,000 to 25,000 PSI(100 to 170 MPs)
* Mildly abrasive ground
Product Tags:
|
|
Forging Type Carbide Drilling Tools 2.5Mpa DTH Drill Bits External Turning Tool Images
|
